문자 보내
뉴스

RT/duroid 6006 High Frequency PCB

중국 Bicheng Electronics Technology Co., Ltd 인증
중국 Bicheng Electronics Technology Co., Ltd 인증
Kevin, Received and tested the boards - thanks very much. These are perfect, exactly what we needed. rgds Rich

—— 부유한 리켓

루스, 나는 오늘 PCB를 얻었고 그들이 단지 완벽합니다. 약간의 인내를 멈추게 하시오 그러면 내 다음 명령은 곧 다가오고 있습니다. 종류는 함부르크로부터 주목합니다 올라프

—— 올라프 쿤홀드

하와이 나탈리. 그것은 완벽했습니다, 내가 참고를 위해 약간의 사진을 첨부합니다. 그리고 나는 예산에 당신에게 다음 2 사업을 보냅니다. 다시 대단히 감사합니다

—— 세바스챤 탑리제크

케빈, 감사, 그들이 완전히 만들어졌고, 잘 작동합니다. 약속된 대로 당신이 나를 위해 제조한 PCB를 사용하는 내 최근의 프로젝트를 위한 링크가 여기 있습니다 : 관계, 다니엘

—— 다니엘 포드

제가 지금 온라인 채팅 해요
회사 뉴스
RT/duroid 6006 High Frequency PCB
에 대한 최신 회사 뉴스 RT/duroid 6006 High Frequency PCB

Hello everyone,

Welcome back to our channel. Today, we’re going to talk about Rogers’ RT/duroid 6006 high frequency PCB.

 

RT/duroid 6006 high frequency PCBs are ceramic-PTFE composites which are designed for electronic and microwave circuit applications requiring a high dielectric constant.

 

RT/duroid 6006 PCB can provide us with high dielectric constant which is helpful to enable circuit size reduction. With low loss property, it is ideal for operating at X-band or below. Additionally, the tight Dk and thickness control deliver repeatable circuit performance.

 

에 대한 최신 회사 뉴스 RT/duroid 6006 High Frequency PCB  0

Now let’s look at the data sheet of RT/duroid 6006 laminates.

 

The first one is dielectric constant. It’s available with value of 6.15 at 10GHz with tolerance +/-0.15. The second parameter is dissipation factor. It’s available with a low value of 0.0027 at 10GHz. This is a very low value.

 

The next is thermal coefficient of dielectric constant (TCDk), the value is -410 ppm/℃, we know the absolute value is very high. That is to say RT/duroid 6006 is not suitable for millimeter wave area and the environments that temperature changes a lot.

 

Then Moisture absorption.

Moisture absorption is the total weight of the circuit board material absorbing external water, which is measured in percentage. At higher frequencies the smaller the better, with a typical value of between 0.1% and 0.2%. The water absorption of RT/duroid 6006 performs as low as 0.05%.

 

Thermal conductivity is 0.49 W/m/K. CTE in X and Y axis is good, Z-direction looks like a little bit higher. Decomposition temperature performs good at 500℃ with thermogravimetric analysis.

 

RT/duroid 6006 has a density of 2.7 g/cm3, a specific heat capacity of 0.97 J/g/K and copper peel of 14.3 pli.

 

 

Finally, RT/duroid 6006 material is flame resistant with UL94-V0 grade and environmently friendly.

 

에 대한 최신 회사 뉴스 RT/duroid 6006 High Frequency PCB  1

 

For RT/duroid 6006 PCBs, we can provide you with single layer board, double layer board, multi-layer board and hybrid types.

 

RT/duroid 6006 PCBs have wide thickness. These are the standard thickness such as 10 mils, 25 mils, 50 mils and 75mils etc. Finished copper on PCB is 1oz and 2oz.

 

Our maximum PCB size on RT/duroid 6006 laminate is 400mm by 500mm, it can be a single board in the sheet and also can be different designs in this panel.

 

Solder mask of green, black, blue and yellow etc is available in house. There’s immersion gold, HASL, immersion silver, immersion tin, bare copper and OSP etc. for pads protection.

 

We can also see their applications in aircraft collision avoidance systems, ground radar warning systems and satellite communications systems etc.

 

Thanks for your reading.

선술집 시간 : 2023-02-28 17:43:23 >> 뉴스 명부
연락처 세부 사항
Bicheng Electronics Technology Co., Ltd

담당자: Ms. Ivy Deng

전화 번호: 86-755-27374946

팩스: 86-755-27374848

회사에 직접 문의 보내기 (0 / 3000)